Sabre Cone Bushings

• Cone shape for minimum resistance and maximum lean
• 16mm/0.62″ tall
• 25mm/0.975″ wide at the wide end
• 19.5mm/0.75″ wide at the narrow end
• Available in X-Type (86A Orange), F-Type (90A Red), R-Type (93A Green) and H-Type (96A Grey)
• Pack contains two bushings with a sticker

If you want lots of turn with minimal resistance, choose Sabre Cone bushings.

A smaller volume of urethane means that these bushings lean and turn a lot more than Barrels or Kingcones, especially at softer duros.

16mm/0.62″ tall and 25mm/0.975″at the wide end, they can be run boardside or roadside in all our trucks.

Hand poured from our own original formula in the USA.