RipTide KranK Short Street Barrel Bushings

Sold as Pair with Small Flat Washers and a Sticker.

The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable.

The ShortStreetBarrel / StreetFatCone setup is for those looking for higher stability at higher speeds but still highly maneuverable. This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup.

The ShortStreetBarrel / StreetMagnum is our go-to set up for most high speed applications in trucks with open bushing seats. Used for high speed applications due to its high stability and versatility.

The ShortStreetBarrel / StreetChubby is our go-to set up for most high speed applications in trucks with more restrictive or stepped bushing seats due to the high stability and versatility this particular combo offers.

.975" Dia x .40" High (24.8mm Dia x 10.2mm High)

• Harder KranK durometer bushings (96a & 93a) for heavier-weight riders (over 140lbs) as harder durometer bushings allow for a nice tight set-up
• Medium durometer bushings (90a - 87a) are for medium-weight riders (100 - 140lbs)
• Softer KranK durometer bushings (84a) are best for lightweight riders (50 - 100lbs) as well as for those looking for a looser setup in the RoadSide position when coupled with a harder duro bushing

PLEASE NOTE: The KranK Formula has quite a bit of adjustability - so order accordingly! You can tighten the kingpin nut up to two full turns to 'harden' or 'loosen' the duro.

• Stiffer bushings will result in a more resistant board, which can be an advantage when performing tricks - medium weight riders may benefit from mixing duro's roadside & boardside. (See guide links below)
• The ShortStreetBarrel offers wicked turnability when paired with either StreetCones or StreetBarrels
• Ideal for carving, freestyle & tricks